Style reference. Size, materials and printing are customized for your order.
Custom Portion Pots with Sealing Lids
Plan the top seal and body as separate components around the small portion cavity.
- Style reference
- E61842
- Structure
- Round portion pot with sealing flange
- Dimensions
- Custom size, confirmed for your product
- Material
- Plastic substrate; resin, wall thickness and intended use to confirm
Size around your product.
Specify the body diameter and depth plus the full sealing-flange width and length; confirm fill separately.
- D
- DiameterMaximum outside diameter of the round body or rim; identify the measurement location.
- H
- HeightOutside height in the specified open or closed state; include the closure where applicable.
Specify the body diameter and depth plus the full sealing-flange width and length; confirm fill separately. Outside dimensions do not establish capacity.
Add your target size
Your values appear on the diagram and in your inquiry. The reference drawing stays at its original proportions.
Design for the finished product.
Keep artwork away from the agreed sealing area and distinguish the lid film from the pot body.
Lid film.
Keep artwork away from the agreed sealing area and distinguish the lid film from the pot body.
Cup body.
Prepare lid-film artwork and any cup-body decoration separately; do not treat the square lid as a wraparound label.
- Keep artwork away from the agreed sealing area and distinguish the lid film from the pot body.
Sealing flange.
Specify the body diameter and depth plus the full sealing-flange width and length; confirm fill separately.
- Keep artwork away from the agreed sealing area and distinguish the lid film from the pot body.
Prepare artwork on the approved production dieline at final size. Confirm bleed, print sides and safe margins before printing.
Request a production dielineTry your artwork on this reference
Select an area on the reference, add text or your logo, then adjust its direction and repeat pattern. Download a placement preview to include with your inquiry.
No target size added. Add your dimensions to include them in the preview.
Use the position fields as an alternative to dragging. Values are percentages of this reference image.
Loading the reference…
A placement concept, not a print-ready file. Confirm print sides, cutouts, glue areas and safe margins on your production layout. Your uploaded image stays in this browser.
- Keep the layers separate.
Place the dieline on its own reference layer. Keep it out of the printed artwork unless your production file instructions say otherwise.
- Check the reading direction.
Review logos and text in the finished orientation. Carry patterns across folds only after checking their alignment.
- Approve a physical reference.
Use the appropriate sample to check fit, opening and print position before confirming production.
Request a quote for this style.
Send your dimensions, quantity and artwork requirements for style E61842.
- Target size and measurement basis
- Quantity, product details and intended use
- Logo, artwork and finishing ideas
Need to check it in hand? Explore sample options ↗
Recommended sizes & materials for common products.
Choose a starting format for this product type, then confirm it against your content, use and selected construction.
| Product & example size | Suggested maximum body diameter × height | Material to consider | Selection & fit notes |
|---|---|---|---|
| Compact round portion pot with sealing flangeExample project: Target outside shape; fill specified separately |
25 × 15mm · D × H | Plastic substrate; resin, wall thickness and intended use to confirm | Confirm the actual usable fill, closure and print area; outside dimensions do not establish capacity. |
| Small round portion pot with sealing flangeExample project: Target outside shape; fill specified separately |
30 × 20mm · D × H | Plastic substrate; resin, wall thickness and intended use to confirm | Confirm the actual usable fill, closure and print area; outside dimensions do not establish capacity. |
| Medium round portion pot with sealing flangeExample project: Target outside shape; fill specified separately |
40 × 25mm · D × H | Plastic substrate; resin, wall thickness and intended use to confirm | Confirm the actual usable fill, closure and print area; outside dimensions do not establish capacity. |
| Large round portion pot with sealing flangeExample project: Target outside shape; fill specified separately |
50 × 30mm · D × H | Plastic substrate; resin, wall thickness and intended use to confirm | Confirm the actual usable fill, closure and print area; outside dimensions do not establish capacity. |
These are illustrative design starting points, not stock sizes or measurements of this reference. Confirm material, construction, printing and sample fit before production. Capacity is confirmed for the actual construction and contents. State the sealing-flange width and length separately.
Discuss your size & material