Method
Describe the desired appearance and handling conditions, then specify the film or coating. Matt and gloss describe effects, not the complete material combination.
Sample
Review the treatment on the proposed print and construction. Examine folds, seams, corners and assembly as well as the flat surface. A suitable effect on one paper is not proof of compatibility with every structure.
Whole pack
Record the finished construction, including adhesives or extra layers, before discussing durability or disposal. Compare samples and the quoted scope under the same conditions. Keep any evidence tied to that complete specification rather than borrowing claims from an untreated base material.
Related specification support
Coatings & Lamination
Select a surface treatment around appearance, handling and the packaging construction.
Compare a converted pack, not only a swatch
Two flat samples may look similar before folding. Make or inspect a converted sample and review folds, glue areas, rubbing and the opening. The chosen finish becomes part of the packaging construction.
Surface treatment on the complete pack
| Check | What to do | Why it matters |
|---|---|---|
| Process | Identify a film layer or applied coating. | The method changes the finished construction. |
| Handling | Check the actual touch and rub conditions. | Appearance alone does not define suitability. |
| Assembly | Inspect folds, seams and glue areas. | A finish can affect later converting steps. |
Record the actual product, material or file version used for the comparison. Identify what remains undecided and which sample or document can resolve it.
Discuss coating and lamination checks
Include the product, proposed pack and available specifications with a sample or file for the surface-finish review.
Lamination vs Coating FAQ
Review compatibility for each substrate and construction. A consistent visual intention does not require an identical process on a carton, pouch and printed card.
No. Identify the actual film layer or coating and the packaging construction. The appearance label alone does not establish the material combination, handling suitability or compatibility with later assembly.
Review the converted pack as well as the flat surface. Check folds, glue areas, seams, corners, rubbing and opening on the proposed print and material before approving the finish.