Reference rendering of this structure. Artwork, material and final dimensions are confirmed for your project.
Custom Mini Envelopes
A flat envelope with side tabs and a rounded closing flap. Plan the card fit, front artwork and the small message revealed on the reverse.
- Style reference
- E60014
- Structure
- Flat pocket · side tabs · rounded closing flap
- Dimensions
- Custom size, confirmed for your product
- Material
- White paper appearance shown; paper grade and sealing method to confirm
Size around your product.
Measure the card or printed insert, including any sleeve. Specify its thickness separately from the envelope face dimensions.
- L
- Face widthThe horizontal width of the closed envelope face.
- W
- Face heightThe vertical height of the closed envelope face, excluding the open flap.
- H
- Contents thicknessThe thickness of the card or insert stack; this is not a gusset or box depth.
This reference is a flat envelope. Thick contents may require a different structure rather than scaling the depth.
Add your target size
Your values appear on the diagram and in your inquiry. The reference drawing stays at its original proportions.
Design for the finished product.
The central rectangle forms the main face. Two side tabs fold inward, a broad panel folds up, and the rounded flap closes over the reverse.
Keep the small face easy to read.
Place the primary logo or a short greeting on the uninterrupted front face.
- Reserve addressing space if the envelope will be mailed.
- Keep key detail inside the fold boundaries.
Give the reverse a small finishing detail.
Use the rounded flap for a compact mark or a restrained continuation of the front design.
- Keep important text clear of the rounded corners.
- Confirm the sealing or adhesive area.
Coordinate the insert and envelope.
Match the artwork orientation to the way the card is removed, and decide whether any inside printing is needed.
- Keep glue tabs free of critical artwork.
- Check opacity and show-through on a printed sample.
Prepare artwork on the approved production dieline at final size. Confirm bleed, print sides and safe margins before printing.
Request a production dielineTry your artwork on this reference
Select an area on the reference, add text or your logo, then adjust its direction and repeat pattern. Download a placement preview to include with your inquiry.
No target size added. Add your dimensions to include them in the preview.
Use the position fields as an alternative to dragging. Values are percentages of this reference image.
Loading the reference…
A placement concept, not a print-ready file. Confirm print sides, cutouts, glue areas and safe margins on your production layout. Your uploaded image stays in this browser.
- Keep the layers separate.
Place the dieline on its own reference layer. Keep it out of the printed artwork unless your production file instructions say otherwise.
- Check the reading direction.
Review logos and text in the finished orientation. Carry patterns across folds only after checking their alignment.
- Approve a physical reference.
Use the appropriate sample to check fit, opening and print position before confirming production.
Request a quote for this style.
Send your dimensions, quantity and artwork requirements for style E60014.
- Target size and measurement basis
- Quantity, product details and intended use
- Logo, artwork and finishing ideas
Need to check it in hand? Explore sample options ↗
Recommended sizes & materials for common products.
The third value is the intended insert thickness, not an envelope depth. The face needs clearance around the card.
| Product & example size | Suggested closed face dimensions (L × W) and contents thickness (H) | Material to consider | Selection & fit notes |
|---|---|---|---|
| A gift card in a thin sleeveExample packed product: 86 × 54 × 1 mm |
100 × 70 × 1mm · L × W × H | White paper; grade to confirm | A compact starting face with clearance around the sleeved card. |
| A small thank-you cardExample packed product: 90 × 60 × 1 mm |
105 × 75 × 1mm · L × W × H | Kraft paper | A kraft paper option; confirm card insertion and flap overlap. |
| A mini invitationExample packed product: 100 × 70 × 1 mm |
115 × 85 × 1mm · L × W × H | White paper; grade to confirm | Check the finished folded card rather than its open sheet size. |
| A small folded noteExample packed product: 110 × 80 × 2 mm |
125 × 95 × 2mm · L × W × H | Kraft paper | Confirm the extra thickness on a folded sample before approving the pocket. |
These are illustrative design starting points, not fixed stock sizes or confirmed production specifications. Example product dimensions include the planned wrapping. Confirm the complete pack, material grade and fit with a sample. The H value is an insert-thickness reference, not a guaranteed capacity or an expandable gusset.
Discuss your size & material