Style reference. Size, materials and printing are customized for your order.
Custom Three-Side-Seal Food Pouches
Plan the front and back artwork on a flat pouch with the opening and sealing edges kept separate.
- Style reference
- E61370
- Structure
- Flat sealed pouch
- Dimensions
- Custom size, confirmed for your product
- Material
- Flexible film or laminate; barrier and sealing requirements to confirm
Size around your product.
Specify the flat width and height, then confirm seal widths, opening and the thickness of the filled contents. This format does not assume a gusset.
- W
- Flat widthWidth across the empty bag in its agreed flat state.
- H
- Flat heightFull flat pouch height including the agreed sealing edges; usable fill space is smaller.
Specify the flat width and height, then confirm seal widths, opening and the thickness of the filled contents. This format does not assume a gusset.
Add your target size
Your values appear on the diagram and in your inquiry. The reference drawing stays at its original proportions.
Design for the finished product.
Keep text inside the usable print area and clear of the top, bottom and side seals.
Front artwork.
Keep text inside the usable print area and clear of the top, bottom and side seals.
Reverse information.
Prepare the reverse information in the same filled viewing orientation as the front and confirm any tear opening.
- Keep text inside the usable print area and clear of the top, bottom and side seals.
Sealing edges.
Specify the flat width and height, then confirm seal widths, opening and the thickness of the filled contents. This format does not assume a gusset.
- Keep text inside the usable print area and clear of the top, bottom and side seals.
Prepare artwork on the approved production dieline at final size. Confirm bleed, print sides and safe margins before printing.
Request a production dielineTry your artwork on this reference
Select an area on the reference, add text or your logo, then adjust its direction and repeat pattern. Download a placement preview to include with your inquiry.
No target size added. Add your dimensions to include them in the preview.
Use the position fields as an alternative to dragging. Values are percentages of this reference image.
Loading the reference…
A placement concept, not a print-ready file. Confirm print sides, cutouts, glue areas and safe margins on your production layout. Your uploaded image stays in this browser.
- Keep the layers separate.
Place the dieline on its own reference layer. Keep it out of the printed artwork unless your production file instructions say otherwise.
- Check the reading direction.
Review logos and text in the finished orientation. Carry patterns across folds only after checking their alignment.
- Approve a physical reference.
Use the appropriate sample to check fit, opening and print position before confirming production.
Request a quote for this style.
Send your dimensions, quantity and artwork requirements for style E61370.
- Target size and measurement basis
- Quantity, product details and intended use
- Logo, artwork and finishing ideas
Need to check it in hand? Explore sample options ↗
Recommended sizes & materials for common products.
Choose a starting format for this product type, then confirm it against your content, use and selected construction.
| Product & example size | Suggested finished flat width × height | Material to consider | Selection & fit notes |
|---|---|---|---|
| Small flat retail portionExample project: Actual contents plus sealing clearance |
100 × 150mm · W × H | Flexible film or laminate; barrier and sealing requirements to confirm | Confirm the seal widths and the filled thickness. |
| Medium flat portionExample project: Actual contents and opening requirement |
120 × 170mm · W × H | Flexible film or laminate; barrier and sealing requirements to confirm | Check access through the unsealed or tear-open edge. |
| Larger flat portionExample project: Actual contents with chosen headspace |
160 × 230mm · W × H | Flexible film or laminate; barrier and sealing requirements to confirm | Confirm the filled sample without assuming a bottom gusset. |
| Large flat refill packExample project: Actual contents and required fill |
200 × 300mm · W × H | Flexible film or laminate; barrier and sealing requirements to confirm | Choose the laminate and seal process around the intended contents. |
These are illustrative design starting points, not stock sizes or measurements of this reference. Confirm material, construction, printing and sample fit before production. Seal margins and filled thickness are separate; these rows do not assume a side or bottom gusset.
Discuss your size & material